.0/msohtmlclip1/01/clip_image002.jpg” alt=”The image file:///j:/lb/latest%20uni%20logo.jpg cannot be displayed, because it contains errors.”>
School of Business
BUACC1506 Accounting and Business Decisions
Assignment, Semester One, 2012
1. General information
As per the course description, this assignment constitutes 30 per cent of the total assessment in this course and is due at10 am on Monday May 21 (week 10 of semester). All assignments are to be submitted via the assignment submission box at the western end of Building B (middle level). The assignment submission box is cleared each morning and assignments submitted after 10 a.m. on any given day will be treated as having been submitted the following day and be subject to late penalties (see below).
2. Purpose
Course BUACC1506 is concerned primarily with the use of accounting information. The main purpose of this assignment is to provide students with the opportunity to apply the knowledge and skills acquired during the semester to a practical task involving the use of real-world accounting information. In particular this will enable you to gain insights into and information about the business of Billabong Limited, a merchandiser of surfwear and other outdoor action clothing, using the published financial statements of the company as your primary data source. This is intended to consolidate students accounting knowledge and skills. Students are required to complete the assignment in pairs and this is intended to foster the development of the co-operative work skills that will be of importance in most employment contexts.
3. Requirements
Students are to organise themselves into pairs to complete the assignment and do not have automatic entitlement to adopt some other arrangement (such as completing the assignment individually or in a group of three). Students who have difficulty finding a partner or who encounter other difficulties (for example, their partner withdraws from the course) should consult the course coordinator. There is no requirement that your partner be from the same tutorial group as yourself.
The basic requirement is to make a general analysis of the profitability, efficiency, liquidity, gearing (leverage), and investment performance of Billabong Limited using the information available in the companys 2011 annual report available available at the following address: .corporate-ir.net/media_files/IROL/15/154279/AGM1/_20110923%20FINAL%20FULL%20FINANCIAL%20REPORT.pdf”>Billaboing Annual Report 2011
Students are to use the Consolidated data in conducting their analysis. Note that the 2011 annual report contains comparative data for the year 2010. The assignment will contain two main elements:
Schedule(s) of relevant ratios and other useful calculations
The schedule(s) of relevant ratios and other useful calculations should be incorporated in one or more appendices. Ratios and other calculations should be presented so as to facilitate comparison between 2010 and 2009 data. Students are advised to show the calculations used in determining particular ratios and other figures.
A written report
The written report should:
· Explain briefly what is revealed by the ratios and other calculations in the context of the companys profitability, efficiency, liquidity, gearing (leverage) and investment performance. In particular, any important changes from 2010 to 2011 should be identified, discussed and, where possible, explained.
· Provide an overall assessment of the company from the perspective of existing and potential equity investors (shareholders).
The assignment is to comply with the Universitys General Guide for the Presentation of Academic Work (revised edition 2011)
.ballarat.edu.au:7777/search/query/search?nodeid=2_9873&fid=-1&sw=t”>guerin.ballarat.edu.au/aasp/student/learning_support/generalguide
and the written report is not to exceed 1,500 words (excluding calculations which are to be incorporated in an appendix). Students are required to use the APA system for the acknowledgment of sources. In order to help ensure that assignments meet required presentation standards, students are strongly advised to use the Presentation check-list attached to these notes.
Students may, if they wish, seek and use additional information about the company from sources other than the annual report (for example, from newspapers, business magazines etc.). However, it is not envisaged that students will be engaged in extensive research of this nature and it is expected that the annual report provided will be the primary resource relied upon in completing the assignment. Students are expected to obtain relevant share price data for the company so that investment ratios (such as a dividend yield ratio) can be calculated. (It is recommended that students obtain the companys share price as at 30 June 2010 and 30 June 2011 for the purpose of calculating relevant ratios on these dates. Share price data is available, among other sources, from newspapers in the library archived on micro-film/fiche.) Under no circumstances are students to make direct personal contact with the company or its officers (for example by telephone, fax, letter or email) in an attempt to gather further information.
4. Presentation
The Presentation check-list (see attached appendix) indicates the requirements and expected standards concerning presentation. An assignment that complies with the guidelines highlighted in this check-list would normally be expected to achieve the required presentation standard (see assessment criteria below). If further guidance is required, students should in the first instance refer to the General Guide for the Presentation of Academic Work publication, available from the University bookshop at Mt Helen campus or online at: http://.ballarat.edu.au/generalguide”>www.ballarat.edu.au/generalguide.
If additional clarification is necessary, students should discuss the matter with the staff member responsible for conducting their BUACC1506 tutorial.
5. Assessment criteria
In assessing submitted assignments consideration will be given to:
· Overall neatness, completeness and quality of presentation. Degree level students are expected to achieve a satisfactory standard with respect to this criterion as a matter of course and for this reason no credit will be granted for achieving it. However, assignments that fail to achieve the minimum standard in connection with this criterion will be penalised. The expected standard concerning this criterion is contained in the attached Presentation check-list.
· Timeliness of submission. Degree level students are expected to be able to meet reasonable deadlines for the submission of assessable work as a matter of course. For this reason no credit will be given for submitting the assignment by the due date. However, assignments that are submitted late will be penalised at the rate of three marks out of 30 per weekday that the assignment is late.
· Demonstrated skill in identifying and calculating relevant ratios and other indicators of profitability, efficiency, liquidity, gearing (leverage), and investment performance. This criterion relates specifically to the requirement to prepare a schedule (or schedules) of relevant ratios and other calculations and carries a weighting of 12 marks out of the 30 available for the assignment.
· Demonstrated understanding of financial reports and ratios and other indicators of profitability, efficiency, liquidity, gearing (leverage), and investment performance. This criterion relates specifically to the requirement to submit a written report and carries a weighting of 18 marks out of the 30 available for the whole assignment. Written reports in excess of 1,500 words will be penalised.
A single copy of the assignment should be submitted, for which the two students who prepared it will usually receive the same mark. This is based on the expectation that each student will have contributed equally to the preparation of the assignment. Where this expectation has not been satisfied separate marks may be allocated.
Selected students may be invited to discuss their assignment with the person responsible for marking it. This discussion will only be taken into account in marking assignments where it provides evidence that the integrity of students work has been compromised. This may, for example, be evidenced by students being unable to explain the meaning of their assignment, being unable to explain why certain information has been included and so on.
6. Plagiarism
Plagiarism is the presentation of the expressed thought or work of another person as though it is ones own without properly acknowledging that person. The Universitys Statute 6.1 Student Discipline and Regulation 6.1 Student Discipline make it clear that plagiarising is a breach of student discipline and may incur a range of penalties.
Appendix: Presentation check-list
As indicated above, the assignment for course BUACC1506 is to be presented in accordance with the Universitys General Guide for the Presentation of Academic Work and proper presentation is part of the assessment criteria for the assignment. To assist students in achieving the required standard the following check-list is provided.
It is highly recommended that students read through the following items before they commence work on the assignment so that they have a general understanding of what is expected concerning presentation. An assignment that complies with the guidelines highlighted in this check-list would normally be expected to achieve the required presentation standard (see the assessment criteria above).
Prior to submitting their assignments students should read carefully through the following statements and tick the Completed box for each item onlywhen they are satisfied that their assignment meets the specified presentation standard.
Section references are to the Universitys General Guide for the Presentation of Academic Work(revised edition, 2011). All students should ensure that they have a copy of this document before commencing work on the assignment.
Completed
1. We have read section 1.1 and understand why the proper presentation of academic work is important.
o
2. We have read and understood section 1.3 dealing with plagiarism.
o
3. We have read section 2.2 concerning Format and complied with its guidelines. Please note that 1.5 or double spacing is required for the written sections of this assignment.
o
4. Our assignment has a title page that contains the information specified in section 2.3.2 (and includes the BUACC1506 tutorial group of each student).
o
5. Our assignment has an abstract (or synopsis or summary) prepared in accordance with the instructions contained in section 2.3.3.
o
Note
As per section 2.3.3, the abstract follows immediately after the title page and should summarise or précis the content of the work. Note that the abstract or synopsis should not simply be a restatement of the topic, nor a table of contents in prose form.
6. If our assignment contains a table of contents, it has been prepared in accordance with the guidelines contained in section 2.3.4.
o
7. If our assignment contains appendices, they have been prepared in accordance with the guidelines contained in section 2.3.6.
o
8. We have read section 3 dealing with general standards of writing and endeavoured to comply with the guidelines it contains.
o
9. We have read section 5.1 and understand the importance of properly acknowledging the use of other writers works. Section 5.1 identifies four alternative standards for reference and citation. For this assignment the Australian (author-date system) is required to be used.
o
10. We have read and understood section 5.2 dealing with the use and presentation of quotations in academic work.
o
11. We have read section 5.4 which deals with the Australian style, and used the Australian (author-date) system in our assignment.
o
Note
In an assignment of this nature the need to acknowledge sources by author-date references may be limited. This is on account of the technical knowledge and skills required to complete the assignment being taught as part of the course content. However, where students quote or use ideas from a particular source (for example, a newspaper article or a textbook) this should be acknowledged. Some judgement is needed in this matter. For example, if a current ratio is calculated there is no need to acknowledge the source of the formula used since the current ratio forms part of general accounting knowledge. However, if a particular author is quoted, or a particular authors ideas concerning, for example, an appropriate current ratio, are used, then an acknowledgment using an author-date reference (see examples in section 5.4.2) will be required. The proper acknowledgment of sources is very important in academic work and it is worth investing some time in learning to do it correctly, as the benefit will be enduring.
12. Our assignment contains a reference list prepared in accordance with section 5.4.3.
o
13. We have carefully proofread our assignment prior to submitting it. (Simply running the assignment through a spell-checker, while helpful, is not a substitute for a careful proofreading). When proofreading our assignment we endeavoured to identify and correct all spelling, punctuation, grammatical and other similar errors.
o
14. We understand that the staff member(s) responsible for taking our tutorials is(are) available to answer questions relating to the presentation of our assignment. If we were uncertain of how to achieve the proper presentation standard we asked a staff member for advice.
o